250LP Weather Resistant CAT5 Lightning Protector Kit
The Enable-IT™ 250LP Lightning Protector is a set of compact weather resistant units that provide lightning and surge protection for CAT5/CAT6 data applications. The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed.
Enable-IT 250LP Weather Resistant CAT5 Lightning Protector
High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +/- 15 volts on pins, 1, 2, 3 and 6 and +/- 58 volts on pins 4, 5, 7 and 8. The unit is compatible with both normal and inverted polarity voltage PoE equipment. For maximum protection this kit provides two 250LP units - one at each end of the CAT5/CAT6 cable. Most PoE capable equipment is not protected from surges on its CAT5 cable. This Lightning Protector Kit is compatible with 10 Base-T, 100 Base-T and 1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).

The compact weather resistant housing features a single port access and a lockable hinged cover that will not close while wires are being terminated. Mounting holes are provided on the rear. A ground lug and terminal is provided in the lightning protector housing providing superior grounding. This lightning surge protector kit is compatible with Cisco Aironet 1100 and 1200 series access points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.

For detailed installation and printable product information, please see the following documents. Enable-IT 250LP Manual
Product Features
  • 10/100/1000 Base-T CAT5/CAT6 protection.
  • Power-Over-Ethernet (PoE) Compatible.
  • Cisco© Reverse Polarity PoE compatible.
  • Impact resistant enclosure that is sealed for weather resistant protection.
  • Rubber sealed grommets for patch cord and grounding wire seal for weather resistant protection.
  • Locking hinged cover for security.
  • LAN In / LAN Out jacks, Grounding terminal Lug
  • Supports 802.3af standard and reverse polarity Power over Ethernet devices

Product Highlights
  • Dramatic cost reduction over
    any competing technology.
  • Digital Technology that delivers
    Lightning Protection in a
    confined space.
  • Ideal for protecting any Ethernet data lines
  • Quick install RJ-45 Ethernet connection

Product Specifications
  • Power:
        None required - passive
  • Connectors:
        Data - Dual 10/100/1000 Base-T LAN RJ-45 Jacks, Grounding Wire lug
  • Dimensions:
     Height 3" (77mm)  Depth 2" (50 mm)  Width 3.6" (91mm)
  • Environment
        Operational Temperature : -40°-176°F (-25°- 80°C)
        Humidity: 5%-90%, non-condensing
  • Enclosure
       Square Light Tan PVC casing with wall mount bracket
  • Pricing is for a complete solution (2) 250LP's in a Kit

Add to :  Add to Del.icio.usDel.icio.us | Add to Digg thisDigg  | Add to redditreddit | Add to Y! MyWebY! MyWeb | NewsVineSeed Newsvine